Why Does My Breaker Go Off When Using My New Kettle? – Possible Reasons of tripping And How To Prevent in 2023

If you have recently purchased a new kettle and every time you turn it on, the circuit breaker trips, you may be wondering why this is happening. There are several reasons why this could be occurring, and it is important to understand the causes to avoid any electrical hazards.

The circuit breaker may have tripped because of high amperage use from the kettle or another appliance on the same circuit. Either the circuit breaker is overloaded by the number of amps running through it, or the kettle itself is defective. It’s also possible that the breaker is weak or failing.

Possible Reasons for Breaker Tripping

Several factors could contribute to the tripping of the circuit breaker. Below are some of the possible causes of the problem.

1. Overloading

The most common reason for breaker tripping when using a new kettle is overloading. This occurs when the electrical current required by the kettle exceeds the maximum amperage the circuit breaker can handle. When this happens, the breaker shuts down to prevent electrical damage and potential fires.

2. Short Circuit

A short circuit is another common reason for breaker tripping. This occurs when two electrical wires with different polarities come into contact with each other, creating an uncontrolled flow of electricity.

In the case of using a new kettle, a short circuit can occur if the wires in the kettle have come loose, causing them to touch each other.

Possible Reasons for Breaker Tripping By Kettle
Source: IOPSpark – Institute of Physics

3. Ground Fault

A ground fault is a problem that occurs when an electrical current takes an unexpected path to the ground. This can occur when the kettle’s electrical wires come into contacts with a grounded surface, such as a metal sink or countertop. The ground fault can cause the breaker to trip, preventing any electrical damage.

4. Faulty Breaker

If none of the above issues is the problem, it could be a faulty breaker. Breakers can wear out over time, and if the breaker has been in use for a long time, it may not function properly. In this case, you may need to replace the breaker to fix the issue.

Also Read: Is There A Minimum Amount Of Water In A Kettle?

How to Prevent the Breaker from Tripping?

Now that we understand the possible reasons for breaker tripping when using a new kettle, let’s look at what we can do to prevent this situation in the future.

How to Prevent the Breaker from Tripping?
Source: Fat Llama

1. Check the Wattage

Before purchasing a new kettle, ensure that the wattage matches the rating of the circuit breaker. If the kettle’s wattage exceeds the amperage rating of the breaker, it will trip when in use. If you are unsure about the wattage, check the manufacturer’s label on the kettle or consult with an electrician.

2. Check for Faults

Before using a new kettle, inspect the appliance for any visible damage or loose wires. If the kettle appears to be damaged or has loose wires, do not use it and seek the services of an electrician.

3. Use a Different Outlet

If the breaker continues to trip, try using a different outlet. It is possible that the outlet you are using is faulty, causing the breaker to trip. Using a different outlet will help you determine if the problem is with the kettle or the electrical circuit

4. Unplug Other Appliances

If the kettle is causing the breaker to trip when other appliances are in use, try unplugging the other devices to reduce the load on the circuit. This will reduce the amount of electrical current required, which may prevent the breaker from tripping.

5. Upgrade the Circuit

If the above steps do not work, you may need to upgrade the circuit to handle the electrical load required by the kettle. This involves installing a new circuit with a higher amperage rating to accommodate the kettle’s wattage. Consult with an electrician to determine the best course of action.

6. Replace the Breaker

If the breaker is the problem, you may need to replace it. Breakers can wear out over time, and if the breaker has been in use for a long time, it may not function properly. In this case, you may need to replace the breaker to fix the issue.

Also Read: What Happens If You Boil A Kettle With Too Little Water?

What could be causing my circuit breaker to trip when I use my newly purchased kettle?

Using your new kettle may trip your circuit breaker for various reasons. The kettle may draw too much power for its circuit. The wiring or circuit breaker may be faulty.

What could be causing my circuit breaker to trip when I use my newly purchased kettle?
Source: The Pioneer Woman

If the kettle draws too much electricity, use it on a different circuit or replace the wiring and circuit breaker. A licensed electrician may need to inspect and repair a wiring or circuit breaker problem.

Also Read: How Does An Electric Kettle Get Hot When It Is Plugged In?

Is my kettle drawing too much power and causing the breaker to trip?

Your kettle may trigger the circuit breaker due to overuse. Electrical appliances draw power from their circuits when turned on. The circuit breaker trips to prevent overheating and fires if the power draw exceeds circuit capacity. 

Check the kettle’s wattage rating on the label or manual to discover whether it’s using too much power. Compare this rating to the circuit’s capacity. If your kettle is 1500 watts and linked to a 1200-watt circuit, it may trip the circuit breaker.

Could there be a fault in the electrical circuit that is causing the breaker to trip when the kettle is used?

Yes, it is possible that there is a fault in the electrical circuit that is causing the circuit breaker to trip when you use the kettle. Electrical circuits can develop faults over time due to wear and tear, improper installation, or other factors. 

These faults can cause the circuit to become overloaded, which can result in the circuit breaker tripping as a safety measure to prevent damage to the electrical system and potential fire hazards.

Also Read: Is It Safe To Use Electric Kettle With Rust?

Should I try using the kettle on a different circuit to see if the issue persists?

Yes, if your kettle’s circuit breaker keeps tripping, try a different circuit. This can help you establish if the kettle or your home’s wiring is the problem. To test the kettle on a different circuit, connect it to a different outlet or circuit breaker in another room. 

Should I try using the kettle on a different circuit to see if the issue persists?
Source: YouTube

If the kettle works on another circuit, the original circuit may be overloaded or faulty. If the problem remains on another circuit, it may be the kettle.

Do I need to replace the circuit breaker or upgrade my electrical system to prevent the issue from happening in the future?

To avoid the kettle overloading the circuit breaker, you may need to improve the electrical system. Install a new circuit with a greater amperage rating, upgrade the wiring, or replace the circuit breaker with one that can handle the load. 

However, if the circuit breaker trips due to an electrical circuit fault, you may need an electrician to diagnose and repair the problem. This may require repairing damaged wiring, mending loose connections, or updating the electrical system to meet safety standards.

Also Read: What Are Dots On The Bottom Of My Tea Kettle?

Why is my new kettle tripping the electricity?

A damaged socket or cable is most likely the main reason why an appliance trips a breaker. This may occur as a result of the cable being damaged in some way, such as after a heavy object has been dropped on it.

What to do before using a new kettle?

You may either wash a new kettle with soap and water or just fill it with water, bring it to a boil, and then drain the water. By doing this, you can make sure that your kettle is clean and prepared to assist you brew your first beverage.

Also Read: Why Does The Kettle Go Quiet Just Before It Boils?

Can an electric kettle short circuit?

Yes, there is unquestionably a problem with an electric kettle (or any other appliance) if a short circuit occurs while it is in normal use. Electric kettles are so inexpensive that it isn’t worth the work, however in some circumstances it might be worthwhile to repair the item.

Can an electric kettle short circuit?
Source: Business Insider

FAQs

Why does my breaker keep tripping when I use my new kettle?

The most common reason for breaker tripping when using a new kettle is overloading. This occurs when the electrical current required by the kettle exceeds the maximum amperage the circuit breaker can handle. When this happens, the breaker shuts down to prevent electrical damage and potential fires.

Can use a new kettle cause a fire?

If the breaker trips when using a new kettle, it is a safety measure to prevent potential fires. However, if the kettle has loose wires or is damaged, it can cause electrical fires. It is important to inspect the kettle before use and seek the services of an electrician if it appears to be damaged.

Why does my kettle switch keep turning off?

Descaling your kettle could be necessary since a buildup of limescale deposits might impair its performance.

What should I do if my breaker keeps tripping?

If your breaker keeps tripping, try unplugging other devices to reduce the electrical load. If this does not work, consult with an electrician to determine the cause of the problem.

How can I prevent my breaker from tripping when using a new kettle?

To prevent the breaker from tripping when using a new kettle, ensure that the wattage matches the rating of the circuit breaker. If the wattage exceeds the amperage rating of the breaker, it will trip when in use. Additionally, inspect the kettle for any visible damage or loose wires before use.

Can I fix a faulty breaker myself?

It is not recommended to fix a faulty breaker yourself. This should be done by a qualified electrician to avoid any electrical hazards.

Should I use an extension cord with my new kettle?

It is not recommended to use an extension cord with a new kettle. Extension cords can cause voltage drops, which can damage the kettle or cause the breaker to trip. It is best to use the kettle in an outlet that is closest to the kitchen counter.

Conclusion

Using a new kettle and tripping the circuit breaker can be frustrating, but it is important to understand the possible causes to prevent any electrical hazards. Overloading, short circuits, ground faults, and faulty breakers are the most common reasons for the breaker to trip when using a new kettle.

To prevent this situation, ensure that the wattage matches the rating of the circuit breaker, inspect the kettle for any visible damage or loose wires, and try unplugging other devices to reduce the electrical load. If none of these steps work, consult with an electrician to determine the best course of action.

Click And Collect More information: Kettle

Articles You Might Be Interested:

How Can I Fix A Leaking Stainless Kettle?

Why Does The Kettle Switch Itself Off?

How To Make Coffee In A Kettle?

What Happens If You Overfill An Electric Tea Kettle? 

Is It Dangerous To Use A Rusty Kettle?

Video Guide:

Leave a Comment